Degree Classification Calculator
Work out your credit-weighted average and UK degree classification — First, 2:1, 2:2, Third or Fail.
Modules
Universities weight modules, years and borderline cases differently — always check your official degree regulations or handbook for the exact rule that applies to you.
What is a Degree Classification Calculator?
This calculator works out your credit-weighted average and translates it into a UK Honours classification — First, Upper Second (2:1), Lower Second (2:2), Third or Fail — using the standard boundaries most universities apply.
How to Use the Degree Classification Calculator
- Choose “Single Weighted Average” for one combined list, or “Two-Year Weighted” if your final grade splits Year 2 and Year 3.
- Add each module with its credit value and your mark (%).
- In two-year mode, set your Year 2 / Year 3 weighting — 33/67 is a common split.
- Read your credit-weighted average, classification, and how far you sit from the next boundary.
How UK Degree Classifications Work
Your credit-weighted average multiplies each module’s mark by its credit value before dividing by total credits, so a 40-credit module counts twice as much towards your average as a 20-credit module.
| Classification | Average Range |
|---|---|
| First-Class Honours | 70% and above |
| Upper Second-Class Honours (2:1) | 60% – 69.99% |
| Lower Second-Class Honours (2:2) | 50% – 59.99% |
| Third-Class Honours | 40% – 49.99% |
| Fail | Below 40% |
Most English and Welsh universities exclude Year 1 from the final classification, weighting only Year 2 and Year 3 — commonly around 33%/67%, though exact schemes vary by institution.
Borderline Policies
Many universities apply a “borderline uplift” — if your average falls within a small margin of the next boundary and enough of your final-year credits sit in the higher band, you may be moved up. Rules vary widely, so always check your own regulations.
Your dissertation is usually one of your highest-credit final-year modules, so a strong mark there can shift your overall average significantly. Our dissertation writing service supports you from proposal through to final draft.
Degree Classification Calculator FAQs
What is a Credit-Weighted Average?
It weights each module’s mark by its credit value, so a 40-credit module influences your average twice as much as a 20-credit one, rather than every module counting equally.
Will This Match My University’s Official Result Exactly?
Not necessarily. Many universities apply their own rules, such as borderline uplift or excluded modules, so treat this as a close estimate and confirm the exact figure against your handbook.
Why Does This Calculator Only Ask About Year 2 and Year 3?
Most English and Welsh universities exclude Year 1 from the final classification, using only the final two years. Scottish and some integrated courses differ, so check your own scheme.
What is a Borderline or Uplift Policy?
Some universities round students up to the next classification when their average is very close to a boundary and enough final-year credits reach the higher band. The exact margin and rule vary by institution.
Can I Use This for an Integrated Masters?
You can, but four-year integrated courses often weight later years more heavily than a standard three-year split, so adjust the Year 2/Year 3 percentages to match your course.
Your Dissertation Decides the Boundary
Our 350+ UK-qualified writers help you push your final-year average over the line, from £15 per 250 words, with a free plagiarism and AI-detection report on every order.
